Float level gauge points of use
2022-11-14
EVA RESINFloat level gauge is widely used in liquid level, chemical industry, metallurgy, electric power, paper making, food and industrial sewage treatment and other departments. By the magnetic reed switch, precision resistors and amplification transform circuit. When the magnetic level gauge magnetic float to a certain position of the reed switch, the reed switch is closed, so that the amplifier output conversion circuit with the measured level corresponding to the current value, as the level changes, Amplifier conversion circuit level will be converted into a linear 4 ~ 20mADC signal output, in order to achieve the level of signal transmission or control.
Float level gauge use points:
1, EVA18J3 the level gauge calibration is normal, cast and found the float in a certain position for a period of time "sucking" phenomenon. This is mainly the level gauge through the steel platform device, the gap between the plate and produced. Therefore, special attention should be paid to the clearance between the liquid level gauge pipe wall and the cutting edge of the platform through the steel platform device. Based on field experience, this distance is about 100 mm to ensure that no impact on the magnetic float.
2, EVA on-site adjustment will find the float moving up and down not sensitive enough. This is mostly due to improper liquid level gauge caused by the device, this time to pay attention to the center of the flange can be up and down in a line, with the degree of vertical plane. Generally speaking, the best angle with the degree of not less than 87 degrees, if the bias is greater, may affect the smooth movement of the float.
3, when the level gauge cast on the spot, pay special attention to open the upper gate valve, then open the lower gate valve. This is due to the level gauge connected to the bottom of the tube is equipped with a maintenance of the float spring, otherwise, the role of large differential pressure float may cause the float gauge can not be used.
4, the use of liquid level gauge, if the output sign
